Position the Right Side (B)
onto the unit and turn the
arrows of the seven Minifix
Cams (H1) clockwise to
secure. Stand the unit upright.
#15
#16
NOTE:
The roller end
of the Flipper Hinge
Slide should be at the
top edge of the Door.
Attach two Flipper Hinge Slides (H6) to each Door (J) using 5/8" Panhead
Screws (H7) through the indicated slots into the pre-drilled holes. NOTE: The
screws should be installed into the center of each slot as shown.
Remove the backings from
the Door Bumpers (H8) and
stick to each bottom corner
of the Doors about ½" from
the edges as shown.
#17
H1
H1
H1
J
H7
H6
H8
H8
