5 of 10
Installation instructions
Installation of this appliance must be by a registered Hetas
engineer or approved by your local building control officer.
All local regulations including those referring to National
and European Standards need to be complied with when
installing this appliance.
Connection to top outlet
As standard the stove will be supplied with a top flue
connection. Fire cement or heat resistant rope should be
inserted into the spigot or around the male end of the
pipe to allow a tight fit. A mechanical fixing such as a self-
tapping screw or rivet is required to secure the pipe into
position. While this connection is made we advise to lift
the stove top in order to give the space required
Connection to rear outlet
Unscrew the top spigot and rear plate using a 10mm
spanner and 4mm allen key. Reposition the spigot onto
the rear of the stove and ensure the gasket is fitted
inbetween the body of the stove and the spigot. Insert a
tee piece into the spigot with fire cement or heat resistant
rope and secure with mechanical fixing such as a self-
tapping screw or rivet.
Mechanical fixing
such as a self-tapping
screw or rivet
Fire Cement
