#30
Attach a channel portion of the Full
Extension Slide (S1) to the right side of
both
drawer assemblies using #6x3/8"
Panhead Screws (H18) as shown.
Assemble the second Drawer unit in the same manner.
Extend cabinet portions of the Full Extension slides
completely out. Slide the channels of the drawer units onto
the slides of the cabinet as shown until secured by the
locking clips.
Check Drawer Fronts (L) for even spacing and alignment. If
adjustment is necessary, loosen Washerhead Screws (H12)
and Long Machine Screws (H17) slightly, reposition Drawer
Fronts, and retighten screws.
#31
Insert Grommets (H20) into
the Left Side (A), Right Side
(B), and Top (C).
Your Glacier Two Drawer unit is now fully assembled and ready for use.
#32
H20
RIGHT
SIDE
CHANNEL
H18
