Ironton 58123, Руководство пользователя, Страница: 6 / 21

Page 6 of 21

Do not force the saw. Products are safer and do a better job when used in the manner for which
they are designed. Plan your work, and use the correct product for the job.

Check for damaged parts before each use. Carefully check that the product will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
product with a damaged part.

Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with
the power switch is dangerous and must be repaired by an authorized service representative
before using.

Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.

Store the saw when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.

Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.

Keep guards in place and in working order. Never operate the product without the guards in place.

Do not leave the saw running unattended.
Specific Operation Warnings
⚠
WARNING

Wear eye protection.

Always use the correct saw blade.

Keep hands out of path of saw wheel.

Do not operate saw without guards in place.

Do not perform any operation freehand.

Never reach around wheel blade.

Turn off tool and wait for wheel blade to stop before moving workpiece or changing settings.

Disconnect power (or unplug tool as applicable) before changing blade or servicing.

Use the correct power tool for your application. The correct power tool will do the job better and
safer at the rate for which it was designed.

Do not use the saw if the switch does not turn on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.

Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.

Never use dull or damaged blades. Sharp blades must be handled with care. Damaged blades
can snap during use. Dull blades require more force to cut the workpiece, possibly causing the