Ironton 58123, Руководство пользователя, Страница: 4 / 21

Page 4 of 21
Intended Use
The Ironton 14 Inch Abrasive Chop Saw has the power to easily cut through cast iron piping, angle
iron, threaded rods, conduit, square tubing, and more. The saw can cut 4 inches round or 3 1/2 inches
square stock at angles up to 45 degrees.
Packaging Contents

Chop Saw

Cutting Blade

Hex Key

Owner’s Manual
Technical Specifications
Property Specification
Power 110V
Disc Diameter 14
”
Power Input 15 Amp
Peak Power 6.5 HP
No Load Speed 3,800 RPM
Maximum Cutting Capacity - Round 4
“ Diameter
Maximum Cutting Capacity - Square 3 1/2
“ x 3 1/2”
Arbor Size 1
”
Important Safety Information
⚠
WARNING

Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.

The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.

Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.

Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.

Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. This
product will be safer and do a better job at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.

Industrial or commercial applications must follow OSHA requirements.