Ironton 46478, Руководство пользователя

Страница: 5 / 11

Page of 11 5
•
Use only accessories that are recommended by the manufacturer for your model. Accessories
that may be suitable for one tool may create a risk of injury when used on another tool.
•
Keep guards in place and in working order.
•
Never leave tool running unattended.
•
Before drilling into walls, ceilings etc, ensure there are no concealed power cables or pipes
in the cavity.
•
Always use the side handle; this gives you greater control if the accessory should
become jammed.
•
Keep the cord clear of the accessory being used. Do not wrap the cord around your arm or
wrist.
•
Get a good grip. Hold the tool by the insulated gripping surfaces when performing an
operation where the accessory may contact hidden wiring or its own cord.
•
Use thick cushioned gloves and limit the exposure time by taking frequent breaks. Vibration
caused by the hammer action may be harmful to your hands and arms.
•
When removing an accessory from the tool, avoid contact with skin and use proper
protective gloves when grasping the bit or accessory. Accessories may be hot after
prolonged use.
•
Always wear eye protection and a dust mask, especially for dusty applications and when
drilling / chiseling overhead. Sanding particles can be absorbed by your eyes and inhaled
easily and may cause health complications.
WARNING
The use of any accessory or attachment, or performance of any
operation with this tool other than those recommended in this instruction manual may present
a risk of personal injury.
OPERATION
BEFORE ATTACHING OR REMOVING ANY ACCESSORIES BE SURE TO DISCONNECT THE
HAMMER DRILL FROM THE POWER SUPPLY.