Ironton 46257, Руководство пользователя, Страница: 2 / 12

Page of 12 2
Thank you very much for choosing an IRONTON product! For future reference, please complete
the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this machine not be modified and/or
used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the machine until you have first contacted the
distributor to determine if it can or should be performed on the product.
For technical questions please call
1-800-222-5381 .
INTENDED USE
This electric shear is ideal for cutting various types of metal with smooth, accurate cuts and precise
control over straight and curved cuts. Variable speed trigger and 360° swiveling head lets you easily
adjust your cutting speed and direction.
SPECIFICATIONS
• Item#: -------------------------- 46257
• Rated Power: ---------------- 120V~, 60Hz, 4.0A
• No-Load Speed: ------------ 0-2500 RPM
• Cutting Capacity: ----------- 14 Gauge Sheet Metal and 18 Gauge stainless sheet.
GENERAL SAFETY RULES
WARNING
:
Read and understand all instructions. Failure to follow all instructions
listed below may result in serious injury.
CAUTION:
Do not allow persons to operate or assemble this saw until they have
read this manual and have developed a thorough understanding of how the saw works.
WARNING:
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors that cannot be built
into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY:
• Keep your work area clean and well lit . Cluttered benches and dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating a power tool. Distractions can
cause you to lose control.