Ironton 45432, Руководство пользователя

Страница: 9 / 19

Page of 19
9
2.2. Install the axle tube/bracket for the axles and wheels on the axle. See following image. Stand
the machine up and install the axle tube/bracket onto the back of panel using the screws and
washers provided. (You may want to use a wooded block to hold the welder up for this step.)
2.3. Finally, install the handle using four sets of screw and washers as following:
- Make sure the welder is disconnected to the power supply when assembling
- When machine is laid on its side do it gently or the impact could damage internal components.
- During installation use caution not to do personal injury from lifting.