Ironton 43954, Руководство пользователя

Страница: 37 / 56

Page No. 36
LED
This menu controls the operation of the LED indicator on the front of the
security light. There are three choices Flash, PIR, Off.
Regardless of this setting, the LED will flash
rapidly whilst your security light isarming or if
movement is detected but no SD card is fitted.
Select Flash mode and the LED will flash at approximately 5 seconds
intervals and come on continuously during recording.
Select PIR mode and the LED will only come on continuously during
recording (After the PIR motion sensor has been triggered).
Select OFF mode and the LED will be off during normal operation.
PIR delay
This option allows you to set a delay which causes the security light to
wait afterbeing triggered before it will resp ond to a trigger again. The
delay options are 0 seconds (no delay) through to 120 seconds (3 minutes).
This can be useful to minimise recordings.