Ironton 39109, Руководство пользователя, Страница: 7 / 12

Page of 12 7
MACHINE HEAD ADJUSTMENT
To carry the cut-off saw: Fold down arm to base and insert the lock down knob into the hole to
lock. (fig. 6)
To unlock the cut-off saw: To unlock tool and raise arm, depress arm slightly and pull out knob.
The motor arm will then pivot upward. (fig.6)
Adjust the depth of cut: (fig .7)
Use the depth adjustment to change the depth of cut. When adjusted properly, the depth adjustment
bolt prevents the cut-off wheel from contacting the surface under the base during cutting. Cut-off
wheels wear down as they are used and the depth of cut may need to be increased.
1. To raise the depth of cut, loosen the hexagon bolt (counterclockwise), then rotate the hexagonal
nut in clockwise direction.
2. To reduce the depth of cut, rotate the hexagonal nut in counterclockwise direction, then tighten
the hexagon bolt (clockwise).
Support the workpiece and adjust the work vise:
The work vise is located on the base of the Cut-off Saw.
The vise is made up of two parts: (fig. 8)
(1) a quick adjust fence which can be loosened and rotated from -45° to 45°.
(2) a movable clamp with an adjustable pivoting handle and a quick lock/ release lever.
When adjusting, the clamp and fence should be positioned so
the centerline of the wheel hub is in line with or behind the
centerline of the workpiece, toward the rear of the tool (fig. 9).
The workpiece should be resting flush with the base of the
cut-off machine.
Fig. 6