Page of 12
2
Thank you very much for choosing an Ironton product! For future reference, please complete the
owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this machine not be modified and/or
used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the machine until you have first contacted the
distributor to determine if it can or should be performed on the product.
For technical questions please call
1-800-222-5381
.
INTENDED USE
For auto body work or any other metal cutting project, this metal shear makes smooth and clean
cuts in aluminum, plastic or sheet metal as thick as 14 gauge. This 120 Volt powered metal
shear features tungsten carbide blades for durability and long life. It is designed for any shop,
garage or hobbyist requiring precision metal cutting.
TECHNICAL SPECIFICATIONS
Voltage: 120V, 60Hz, 3.5Amps
Arbor Reciprocating Frequency: 1800 RPM
Max Shear Thickness: 14 gauge
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed
below may result in serious injury.
CAUTION:
Do not allow persons to operate or assemble this Metal Shear
until they
have read this manual and have developed a thorough understanding of how the Metal Shear
works.
WARNING:
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur.
It must be
understood by the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS