background image

Printed in U.S.A. © 2019 Innovative Hearth Products

P/N  900981-00   Rev. NC  08/2019

32

Model Number _____________________________________________________

Serial Number _____________________________________________________

Date Installed ______________________________________________________

Your Dealer's Name _________________________________________________

WARRANTY

Your wood appliance is covered by a limited warranty (provided with the 

appliance).  Please read the warranty to be familiar with its coverage.

Retain this manual. File it with your other documents for future refer-

ence.

REPLACEMENT PARTS

See Pages 24 through 28  for a complete replacement parts list.  Use 

only parts supplied from the manufacturer.

Normally, all parts should be ordered through your IHP distributor or 

dealer. Parts will be shipped at prevailing prices at time of order.

When ordering repair parts, always give the following information:

1.

 The model number of the appliance.

2.

 The Serial Number of the appliance.

3.

 The part number.

4.

 The description of the part.

5.

 The quantity required.

6.

 The installation date of the appliance.

If you encounter any problems or have any questions concerning the 

installation or application of this system, please contact your dealer.

Innovative Hearth Products (IHP) 

1769 East Lawrence Street

Russellville, AL 35654
IronStrike.us.com

PRODUCT REFERENCE INFORMATION

We recommend that you record the following important information about 

your appliance.  If you did not purchase your appliance directly from an 

IHP dealer, then contact us at IronStrike.us.com to find your nearest 

IHP dealer who will answer your questions or address your concerns. 

1769 East Lawrence Street • Russellville, AL 35654

Innovative Hearth Products (IHP) reserves the right to make changes at any time, without 

notice, in design, materials, specifications, and prices, and also to discontinue colors, styles, 

and products. Consult your local distributor for fireplace code information.

P900981-00

Содержание Performer S210AGL

































Отзывы: