4
9
Step 10: If you plan to use the Ironmaster Quick-Lock
Dumbbells as the weight source on the carriage, install
the CARRIAGE DUMBBELL ADAPTER #24 using bolt
#6 with the Allen wrench as shown.
Step 9: Adjust the cable tension by screwing in the adjustment
screw to remove the slack in the cable. Lock the position with the
lock nut to the BASE FRAME #9.
Note: It will be necessary to readjust this screw after some use of
the cable system. Adjust as needed. It is recommended to set
some weight on the CARRIAGE #23 to pretension the cable be-
fore adjusting.
10a
10b
Be sure to check and tighten all bolts
before use. It will be necessary to
use a wrench to hold the nuts when
tightening the Allen bolts on the
Pulleys.
Carriage Dumbbell
adapter
Adjust-
ment
screw
Step 11: If you
plan to use Olym-
pic style weight
plates on the
weight carriage,
you can install the
2 included OLYM-
PIC SLEEVE
ADAPTERS #28
as shown. Secure
with the set
screws. Push on
the rubber rings
#29 as bumpers.
11a
11b
Olympic Sleeve
Adapter
Important:
Содержание Cable Tower
Страница 7: ...7 Exploded View Ironmaster Cable Tower ...
