Ironman Fitness 5214, Руководство пользователя

Страница: 12 / 29

11
ASSEMBLY INSTRUCTIONS
Step 1
Stand up the base of the machine by separating the frames.
Pull the Front and Rear U-Frames (1, 2) as far apart from
each others as possible. Then push down on the middle of
the two Folding Arms (8) until they are fully locked down.
Attach both Front Foot Caps (53) onto the Front Frame (1)
with two Ø16xØ6.5x1.0 Washers (27) and M6x25 Bolts (51).
Attach Left Rear/Front Foot Caps with Handle (47, 48) and
Right Rear/Front Foot Caps with Handle (49, 50) onto the
bottom of the Rear U-Frame (2) with eight ST3.5x15 Screws
(54). Tighten bolts and screws with the Multi Hex Tool with
Phillips Screwdriver provided.
Hardware:
․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․
Step 2
Install two Ø27xØ13.5 Nut Caps (55) onto M8x23 Hex Head Bolts (38).
Slide the Protective Covers (37) on to each side of the base as shown, and
pull down on the covers until the bottom of the covers are slightly lower than
the Folding Arms (8). Use the Velcro straps on the bottom of the covers
to secure the covers to the folding arms. When the covers are
assembled correctly, the folding arms should be fully covered by the
protective covers.
Hardware:
2 Nut Caps (Ø27xØ13.5)
8
2
1
54
49
50
47
48
54
53
51
27
53
51
27
Multi Hex Tool with Phillips Screwdriver
Tool:
2 Washers
(Ø16xØ6.5x1.0)
2 Bolts (M6x25)
8 Screws (ST3.5x15)
37
2
1
55
38
55