Ironkids FITNESSPLAYGROUND 8201 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 49

Ironkids FITNESSPLAYGROUND 8201 Скачать руководство пользователя страница 39

GROUND ANCHOR INSTALLATION

You may either anchor the feet of the frame in hard soil or if your soil is soft (sand, etc.), you may use
the corkscrew (A8) anchor to secure the playground.    If you wish to permanently  secure your swing
set, setting the legs in concrete secured by a brick or gravel bed is recommended.    Ensure
equipment  is firmly  anchored  before use.    When cementing equipment,  bury the legs about three
inches below the ground.    This will ensure sufficient space remains under the swings.    Be certain
that all anchoring  devices (including  concrete) are placed below the level of the playing  surface or
below ground level to prevent tripping.    Be sure the  swing set is located  on level  ground.

For Soil Ground Installation:

Turn the corkscrew anchor into the ground  until only the hooked  end is above  the ground next to the
leg.
Insert the hooked  end into the bottom opening  of the leg.
Ensure that the hooked  end is secure in the leg opening.

Correct Incorrect

When turning the corkscrew anchor into the ground, please make sure the anchor is roughly
perpendicular to the playground feet.

A8

A8

A8

38

«
...
37
38
39
40
41
...
»

Содержание FITNESSPLAYGROUND 8201


















































Отзывы:

Нет отзывов