Ironkids FITNESSPLAYGROUND 8201, Руководство пользователя, Страница: 32 / 49

Step 13

Put T7A to the outside of T4A, and put T7B to the outside of T4B, align the holes.

Secure using T10, T12, T19, and T14 for the upper hole of T7A and T7B.

Secure using T11, T12, T19, and T14 for the lower hole of T7A and T7B.
Note: The T10’s are longer than the T11’s.
Do not over-tighten the screws as it will make STEP 16 more difficult to assemble.
․․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․
Step 14

Lay out the T2 (Jump Mat) and align each triangle ring of the mat towards the opposite holes of
T4A, T4B, T5, and T8A. One triangle ring against to one hole of T4A, T4B, T5, and T8A.

Attach a spring (T9) with spring hooks face down to the triangle ring of the mat. Hold the spring
loading tool underhand and pull spring hook towards the hole on the T4A, T4B, T5, and T8A as
shown in detailed drawing. Drop hook into the frame hole until it latches on.
Note: Be careful not to pinch hands or fingers on springs. Use gloves to prevent pinching.
Keep springs dry; wet springs are very slippery.
31