manualshive.com logo in svg

Ironkids 8030, Руководство пользователя, Страница: 16 / 19

Поделиться
Скачать
Ironkids 8030 Скачать руководство пользователя страница 16

15

M10x50mm Bolt & Binder Post Set 

(Preassembled) 

8 SETS 

E

M6x12mm Bolt 

2 PCS 

F

Allen Wrench 3mm 

1 PC 

(Included) 

Bolt

Threaded Sleeve 

10

Threaded Sleeve 

Bolt

7

4

9

F

F

D

Lock Washer 

11 

E

Allen Wrench 5mm 

2 PCS 

(Included) 

Tool: 

D

M8x62mm Bolt & Binder Post Set 

(Preassembled) 

8 SETS 

Merry Go Round Seat Assembly 

Before you begin this step:

 Remove the mounting hardware from the Seat Posts (11).  You will 

need them to attach the Merry Go Round Seats (10). 
1. Place a Merry Go Round Seat (10) over the holes at the Seat Post (11), making sure the holes in

the Seat Post (11) are aligned with the holes in the Merry Go Round Seat (10).

2. From the bottom of the Seat Post (11), insert two threaded sleeves through two lock washers,

Seat Post (11), and Merry Go Round Seat (10).

3. From the top of the Merry Go Round Seat (10), insert two bolts through the opposite end of the

threaded sleeves and firmly tighten the bolts and threaded sleeves with two 5mm Allen Wrenches
provided.

4. Repeat steps 1 - 3 for the remaining three Merry Go Round Seats (10).
5. Insert a Seat Post (11) into an opening on one of the Spinning Hub (7) arms, making sure the

holes of the Seat Post (11) align with the holes on the Spinning Hub (7).

6. Fasten the Seat Post (11) to the Spinning Hub (7) by inserting two threaded sleeves into two lock

washers, through the bottom of the Seat Post (11) and Spinning Hub (7).

7. Align the bolts with the opposite end of the threaded sleeves and tighten the bolts and threaded

sleeves with two 5mm Allen Wrenches provided.

8. Repeat steps 5 - 7 for the remaining three Seat Posts (11).
9. Insert two M6x12 mm Bolts (F) through the holes on the Plastic Ring (9) and firmly tighten the

bolts with one 3mm Allen Wrench provided.

Содержание 8030




















Отзывы:

Нет отзывов