Ironkids 8030 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 19

Ironkids 8030 Скачать руководство пользователя страница 15

14

Attach the Curved Top Bars and Legs to the Center Fitting

Before you begin this step:

Remove the mounting hardware from the Curved Top Bars (1). You will

need them to attach the Center Fitting (2) and Legs (3) assembly.

1. Insert the Curved Top Bar (1) into the Center Fitting (2), making sure the holes of the Center Fitting

(2) and the Curved Top Bar (1) are aligned.

2. Place two threaded sleeves into a lock washers and through the holes of the Center Fitting (2)

and the Curved Top Bar (1).

3. Insert the bolts and firmly tighten the bolts and threaded sleeves with two 5mm Allen Wrenches

provided.

4. Insert a Leg (3) into the Curved Top Bar (1).

5. Place the threaded sleeve into a lock washer and through the holes of the Curved Top Bar (1) and

the Leg (3).

6. Insert the bolt and firmly tighten the bolt and threaded sleeve with two 5mm Allen Wrenches

provided.

7. Repeat steps 1 - 7 for the remaining two Curved Top Bars (1) and Legs (3).

M10x50mm Bolt & Binder Post Set

(Preassembled)

6 SETS

B

Bolt

Lock Washer

Threaded Sleeve

2

1

3

M8x50mm Bolt & Binder Post Set

(Preassembled)

3 SETS

A

Allen Wrench 5mm

2 PCS

(Included)

Tool:

«
...
13
14
15
16
17
...
»

Содержание 8030




















Отзывы:

Нет отзывов