8
STEP 5
A.
Insert 4pcs Spacers (Plastic & steel ) (G) to the 4 holes in Backboard Glass.
B.
Remove the screws on Rim spring box cover, open the Spring box.
(Rim Spring Box cover may not be factory-assembled.)
Slide 4 Carriage bolts M10x70mm (R1-rim hardware kit) thru Rim plate, Spacers and Backboard, secure
with 4 Flat washers M10 (R2-Rim hardware kit ) and 4 Flange nuts M10 (R3-Rim hardware kit ) from the
backside of Backboard.
Re-attach Spring box cover to the Rim with
removed screws.
NOTE: Use a level to make sure rim is level side
to side before tightening nuts.
C.
F
G
E
R1
R2
R3
