Ironclad HIGHLIGHT HOOPS HIL664 Скачать руководство пользователя страница 1

Страница: 1 / 8

ADJUSTABLE BASKETBALL SYSTEM

MODEL: HIL664

ASSEMBLY INSTRUCTIONS AND OWNER'S MANUAL

WARNING

IRONCLAD SPORTS, INC
902 Corey Road, Hutchinson, KS 67501
Telephone: 620-662-2233
www.ironcladsports.com

IRONCLAD SPORTS , INC
HIGHLIGHT HOOPS

Keep this instruction manual in case you have to contact the manufacturer for replacement parts.

FAILURE TO COMPLY WITH ANY OF

THE WARNINGS IN THESE INSTRUCTIONS
MAY RESULT IN SERIOUS PERSONAL
INJURY.

FAILURE TO COMPLY MAY ALSO

RESULT IN PROPERTY DAMAGE.
PLEASE HEED ALL WARNINGS AND
CAUTIONS TO ENSURE YOUR SAFETY.

DO NOT ATTEMPT TO ASSEMBLE

THIS SYSTEM WITHOUT CAREFULLY
READING AND FOLLOWING ALL
INSTRUCTIONS. BEGIN BY IDENTIFYING
AND TAKING INVENTORY OF ALL PARTS
USING THE PARTS LIST PROVIDED.

Содержание HIGHLIGHT HOOPS HIL664









Результаты поиска

Содержание HIGHLIGHT HOOPS HIL664

Отзывы:

Похожие инструкции для HIGHLIGHT HOOPS HIL664

Бренды по названию

Популярные бренды

Ironclad HIGHLIGHT HOOPS HIL664, Руководство пользователя

Результаты поиска

Содержание HIGHLIGHT HOOPS HIL664

Отзывы:

Похожие инструкции для HIGHLIGHT HOOPS HIL664

Бренды по названию

Популярные бренды