IronAir TTD1146OF, Руководство по эксплуатации

Страница: 10 / 16

10 TTD1146OF
DAILY OPERATION
It is recommended that the tool always be supplied via a residual current device having a rated
residual current of 30 mA or less.
STARTING THE COMPRESSOR
1. Move the pressure switch to the OFF position
2. Attach the air hose to the quick connect coupler
3. Close the drain valve completely
4. Check the air filter is attached
5. Plug the power supply cord into power supply socket
6. Move the pressure switch to ON position.
7. Let the motor run and tank fill until the motor automatically turns off.
8. Adjust the airflow to suit the tool being used. While the air compressor is running, turn the
air tool “on” and turn the regulator knob to increase the pressure until the desired pressure
is reached.
9. Once the air tool is setup, use normally.
SHUTTING DOWN THE COMPRESSOR
1. Move the pressure switch to the OFF position
2. Unplug the supply power cord
3. Reduce the pressure in the air tank through the air supply hose or the drain valve.