Assembly Procedure
Some components are very heavy
and can be damaged if mis-han-
dled. Also, to help prevent per-
sonal injury, it is strongly recom-
mended that two (2) people work
together to uncrate and assemble
the log splitter.
1
.
Remove and read the instructions
and safety recommendations before
assembling or operating this log
splitter.
2
. Remove the base unit from the pallet
using two people or a lifting device.
3
. Attach the wheels to the base unit using
four lug nuts each.
CAUTION
Unpacking the Crate
1
. Cut the metal banding and remove the top,
sides, ends, and protective plastic cover-
ing of the packing crate. Do not remove
the base unit or the rail assembly from the
bottom pallet at this time.
2
. Carefully check the larger components on
the shipping pallet for damage. If the parts
are damaged call Iron & Oak Products at
(815) 672-8596.
3
. Cut all the remaining banding straps, open
the cardboard box, and make sure all the
smaller parts have been shipped. The
chart in the “Shipping List” section pro-
vides a complete list of all the parts
shipped with your log splitter. If any parts
are missing call Iron & Oak Products at
(815) 672-8596.
NOTE:
The contents of the cardboard box
contains the hitch assembly, two safety chains
and safety quick-link, two fenders, and a filter
element. Also, included in the box is a plastic
bag of miscellaneous hardware and a plastic
bag with the valve handle, knob, valve link,
clevis pins, and cotter pins.
Iron & Oak
10
815-672-8596
815-672-8596
11
Iron & Oak
