4
. Attach the towing safety chains to the tow
vehicle.
5
. Place a customer supplied lock or lock pin
into the latch assembly of the hitch.
Making sure the log splitter is securely
attached to the vehicle is the responsibility
of the owner/operator. Failure to securely
attach the log splitter can cause loss of
control of the vehicle or the log splitter
being separated from the towing vehicle,
resulting in serious injury or death.
WARNING
Towing
Maximum Speed Limit — 35 mph
Your log splitter is built on a solid, unsuspended axle. To prevent damage or
possible loss of vehicle control, use extreme caution when towing and do not
exceed a vehicle speed of 35 mph, especially when driving on a bumpy road.
1
. Position the hitch of the log splitter over or
onto the tow vehicle’s tow ball. In some
cases, the hitch may not totally engage
with the ball without raising the jack leg
assembly. Pull the latch assembly on the
hitch up and into the open position.
2
. Release the latch assembly on the hitch
and lock the hitch onto the ball.
3
. Raise the front leg to the towing position
by pulling the spring pin. If not already
secure, make sure the hitch is properly
and securely attached to the ball.
WARNING
Iron & Oak
18
815-672-8596
815-672-8596
19
Iron & Oak
