ASSEMBLY
STEP 4
Align support bar in between tabbed legs.
Secure but do not tighten support bar with
(2) screen bolts and (2) screen nuts.
STEP 6
Align divider screen to M2 desk.
Secure divider screen to underside of main top
with (4) lag bolts.
SB
2
1
Insert screen bolts into
the support bar through the tabbed
legs using a 3/8 hex drive.
Fasten screen nut to screen bolt
on backside of screen using a
15/16 crescent wrench.
3
2
STEP 5
Flip M2 desk into an upright position.
DS1
M2
M2
Screw in (4) lag bolts into
divider screen on each side
with #3 square drive.
1
