irobot scooba 200 series owner’s Manual
EN
Cleaning system
scooba uses and automatic three-stage cleaning system
in every pass. scooba has a unique two chamber tank
design that ensures fresh cleaning solution never mixes
with the dirty water that scooba picks up as it cleans.
1
Washes
– scooba lays down fresh cleaning solution.
2
Scrubs
– scooba gently scrubs the floor.
3
Dries
– scooba uses a squeegee and
vacuum to pick up the dirty water.
irobot approves using scooba with plain tap water or scooba
hard floor Cleaning solution which is specially formulated to
be tough on cleaning but safe around children and pets.
Scooba has two cleaning cycles.
always completely fill scooba for best performance. upon completion of a short cycle, scooba will
have water remaining in the fill tank and can complete a second short cycle if desired. be sure to
empty and rinse both tanks before storing for future use.
Caution: use of other solutions may damage scooba and voids the warranty. never use bleach.
Cleaning Cycle Room Size
Approx. Cycle Time
How to Start
When should I use this cycle?
full
up to 14 m2
(150 sq. ft.)
45 minutes
Press Power on.
Press Clean and release
when song starts.
for larger rooms or any room
that needs extra cleaning time
short
up to 6 m2
(60 sq. ft.)
20 minutes
Press Power on.
Press and hold Clean
until second song starts.
to clean multiple small areas on
a single battery charge
1
3
2
5
