EN
Roomba Combo j7 Owner’s Guide
3
Mopping
• Your robot is able both vacuum and mop at the same time. To start a
vacuum and mop cleaning job from your robot, fill the tank, attach a
mopping pad, and press the clean button.
• When your robot encounters carpet during it’s
cleaning job, it will lift and tuck the mopping
pad away.
• After completing your mopping and vacuum
cleaning job, make sure to empty the water
tank and replace the mopping pad.
• Your robot will automatically explore and clean your home in neat rows,
avoiding obstacles using its front-facing camera. It will return to the charging
station at the end of a cleaning job and whenever it needs to recharge.
• To end a job and send the robot back to its charging station, hold the clean
button down for between 2-5 seconds. A blue light ring pattern will indicate
that the robot is seeking the charging station.
• When your robot detects an especially dirty area, it will engage Dirt Detect™
mode, moving in a forward/backward motion to clean the area more
thoroughly. The light ring indicator will flash blue.
Vacuuming
• To start a vacuum-only cleaning job from your robot, empty the tank or
detach the mopping pad before pressing the clean button.
Just press the clean button
Tap to Start / Pause / Resume
Hold for 2-5 seconds to end a job
Your robot is able to recognize and avoid
objects. However, it is still recommended
to remove excess clutter before cleaning.
When your robot senses that its bin needs
to be emptied, the light ring indicator
will illuminate in a red sweeping motion
toward the rear..
Cleaning
WARNING:
To prevent damaging your robot, do not manually stow the
mopping pad plate onto the pad shelf.
1
3
2
4
Press bin release button to
remove bin.
Attach mopping pad.
Fill tank with water and
compatible cleaning solution.
Place bin back in the robot.
