20
iRobot Looj 300 Series Owner’s Manual
Handling dense Clogs
Looj can handle most debris found in your gutter. Occasionally, there may be
heavy debris that will not clear in a single pass. Should this situation arise,
it’s important not to force the robot into the debris.
To handle heavy clogs, leave the auger on and drive the robot slowly forward
until the auger contacts the clogged debris. Press the forward button twice
and hold to proceed at half speed. Allow the auger to eject a small amount
of debris. If Looj gets stuck, reverse direction and allow the auger to clear
away the debris that have loosened. Repeat this process until the clogged
debris is fully cleared.
CAuTION: If Looj begins to climb up over debris, STOP MOVING THe
RObOT FORWARd and back it up. If you drive the robot over debris and
up the side of the gutter, you risk it falling out of the gutter which may
cause injury. Never let anybody stand below the gutter during robot
operation.
