IWF 1131
1
Contents
Contents.......................................................................................................................................
1
Main parts ...................................................................................................................................
2
System orientation ......................................................................................................................
3
Settings .......................................................................................................................................
4
N/R rotation - Yarn separation .....................................................................................................
5
Balloon control ............................................................................................................................
6
Threading .....................................................................................................................................
7
Fault finding..................................................................................................................................
8
WARNING
CAUTION MUST BE TAKEN IN THE CLOSE VICINITY OF THE FEEDER AS IT CONTAINS
MOVING PARTS THAT CAN CAUSE INJURIES AND, IN NORMAL OPERATION, STARTS
WITHOUT PRIOR WARNING.
THE POWER SUPPLY MUST BE SWITCHED OFF AT THE MAINS BEFORE ANY WORK IS
CARRIED OUT ON THE FEEDER, THE TRANSFORMER OR ANY OTHER ELECTRICAL
COMPONENTS. THE FEEDER AND THE TRANSFORMER CABINET MUST BE FULLY
ASSEMBLED BEFORE THE POWER SUPPLY IS CONNECTED.
THE FEEDER AND TRANSFORMER CONTAIN ELECTRICAL COMPONENTS THAT RETAIN
AN ELECTRIC CURRENT UP TO THREE MINUTES AFTER DISCONNECTION
ALL WORK ON ELECTRICAL COMPONENTS MUST BE CARRIED OUT BY A QUALIFIED
ELECTRICIAN.
TO COMPLY WITH C. E. REGULATIONS ONLY REPLACEMENT PARTS APPROVED BY
IRO AB MAY BE USED
Ref. No. 31-8931-0201-04/0103
31-8931-0201-04/0103-GB 01-01-22 12.40 Sidan 2
