14
Ref. no. 31-8939-0201-05/1805
1131 X2
Rotating the spoolbody
With feeder connected to the weaving machine and
machine power on.
Switch off the feeder.
Press the button on the stopper housing and ensure
that the magnet pin retracts. The spool body can be
rotated as long as the button is activated.
With feeder removed from the weaving machine OR
when the power to the weaving machine is switched
off. Remove the two screws retaining the stopper
housing.
Remove the stopper housing completely. The spool
body can now be rotated as necessary.
WARNING!!
Failure to follow these instructions will result in damage to the spool body,
stopper magnet, stopper magnet pin or the stopper housing
When reassembling the stopper housing it will
be necessary to adjust the distance between the
magnet and the magnet finger (B) using the stopper
housing adjustment guide (A).
NOTE
Press the stopper housing towards the motor
flange while tightening the screws in order to
secure the correct distance between the stopper
housing and the magnet finger.
A
Make sure that the yarn break sensor mirror is in the
upper position before running. The circumference
scale should be in position as indicated.
