IRiver Astell & Kern AK500A, Инструкция

Страница: 14 / 69

1 3
1. Assemble the AK LED, before aligning the AK500P to the
stand of the AK LED. For detailed assembly information,
see the AK LED manual.
2. Align the mounting holes on the AK LED stand to the AK500P and
assemble by securely fastening three bolts using the long T-wrench.
3. After attaching AK500P to the stand, align the AK500A to
the mounting holes on the AK500P and securely tighten a
total of three bolts using the T-wrench.
4. As the final step, align the AK500N to the mounting holes on the
AK500A and securely tighten a total of three bolts using the T-wrench.
Assembling the AK500N, AK500A, and AK500P
Before Use
English
After detaching the stand from the AK500N and before
assembling together with the AK500A, lay the unit on a soft
cloth with the opposite side of the volume wheel facing down.
Do not apply excessive force when tightening the bolts
with the T-wrench.
Securely tighten each bolt to prevent shaking or separation
of the units.
Applying excessive force to a fully assembled product may
cause the units to topple and be damaged.