IPU 40234 issue 3
Page 18 of 28
♦
Isotherms
.Select “High”, “Low”, or “High & Low” in order to highlight areas of the scene
with temperatures within a high (red) or low (blue) temperature band. The temperature
bands are adjustable by means of Hotkey 1 and the navigation keys.
Red isotherm
Blue isotherm
Combined isotherms
♦
Temp. profile
.Select “Horizontal” or “Vertical” to enable a histogram of temperature values
along a horizontal or vertical cross section to be displayed on the right hand side or the
bottom of the display. The position of the cross section is indicated by small arrows at
the left and right or top and bottom of the image and can be adjusted by means of
Hotkey 1 and the navigation buttons.
Vertical Profile
Horizontal profile
♦
Temp alarms
.Select “High”, “Low”, or “High & Low”. Visual and audio alarms will be
triggered if either cursor or a point within the designated area is higher or lower than a
set temperature. The high and low set temperatures may be adjusted by means of
Hotkey 1 and the navigation buttons.
Note: not available in the IR16DE.
