30
4.3.2
Check phone is seated properly
Make sure the phone is seated face up on the stand-up charger and the
blue light is blinking to indicate the phone is charging. If the stand-up
charger is not emitting a slow blue light, then it’s not charging. Reseat the
phone on the charger until you see its emitting a slow blue light.
4.4 Why can’t I see the Inspire display in my headset?
4.4.1
Proximity sensor?
4.4.2
Check cable connections
●
Check the connections between the USB cable, the headset and the
IrisVision phone. The display will not operate unless the connection
between the headset and the Inspire phone is fully engaged and
secure and the phone is powered on.
●
Disconnect and reconnect the USB cable to the phone and headset.
4.4.3
Ensure that phone screen is on and unlocked
4.4.4
Restart the phone
If these steps do not fix the issue, then please restart the phone.
4.5 Why is my headset hot to the touch?
The headset is powered by the phone and may warm up during normal
use. An internal temperature sensor will prompt the device to shut down
and cool off if it gets too warm. Ensure you do not charge the device
while in use.
4.5.1
Unplug Inspire phone from headset
Ensure that the Inspire phone is unplugged from the headset before
charging. The camera portion of the headset will heat up some during
use, this is normal.
