Iriss Sonus PD Alert, Руководство по эксплуатации, Страница: 8 / 31

8
2020 Sonus PD Alert Operating Manual
Connection Types
The Sonus PD Alert is configured with the following physical connection types:
• 3x Active BNC Connectors
• 1x Passive BNC Connector
• SCADA Network Connector
• Ethernet Port (8P8C)
CE Compliance
The Sonus PD Alert system complies with the following directives:
EN 61000-6-2: 2005 IMMUNITY STANDARD (INDUSTRIAL ENVIRONMENT)
EN 61000-6-3: 2007 EMISSION STANDARD (RESIDENTIAL, COMMERCIAL and LIGHT INDUSTRY ENVIRONMENT)
The Sonus PD Alert Kit List
The Sonus PD Alert Kit includes:
• 1 x Sonus PD Alert
• 1 x Sonus PD Alert power supply
• 3 x AA Ultrasonic PD Sensor
• 1 x CC-TEV PD Sensor
• 1 x GSM Aerial
• 4 x Sensor Cables
• 1 x Sonus PD Alert Operating Manual
General Substation Safety Precautions
Before setting up the Sonus PD Alert in the substation it is important for the user to read and understand the
following general safety information.
The engineer should obey the plant owner’s High Voltage safety rules at all times. The following safety rules
which are particular to the Sonus PD Alert equipment should be applied in addition to the existing safety rules,
which are required by the plant owner. General safety rules for the use of the Sonus PD Alert are as follows:
1. Avoid working alone.
2.
Only accredited personnel with appropriate Health and Safety Training should use the equipment.
3. Do not use the equipment if it is damaged, or its safety is impaired in any way.
4. Inspect and test all ground leads and signal cables for continuity.
5.
The User should have read and understood the appropriate equipment manuals.
6. Always select the appropriate sensor and sensor connection for the application.
7. The Sonus PD Alert has been designed for use only on the earthed, outer surfaces of metal-clad equipment and the earth/
neutral connections of cables. Under no circumstances should the PD sensors be connected to the high voltage terminals of
HV Plant under test.
8. Always maintain Safety Distances between the Sonus PD Alert, PD sensors, the operator and any high voltage components.
9.
Do not disturb or interfere with the high voltage equipment in any way.
10. The User should wear sensible and appropriate PPE and clothing when in the substation.