QPSK/IP DEMODULATOR
The TS/IP function block is valid when the TS/IP streaming board is installed into the This
equipment
-
x. You can set it as
‘IP In’ or ‘IP Out’, which is exclusive to each other (refer to section
7.4.6).
The Mux/Filter function block is standard option and could be configured as internal 2-way
‘multiplexer’ or ‘filter’, which is exclusive to each other. Also you can turn on or turn off the block
(refer to section 7.4.6).
Common Interface
Mux/Filter (option)
Figure 6.1 Function Block Diagram
START TO USE
The device allows you to configure, control and monitor through the Keypad and front panel
display when a remote control system is not used.
Main Menu
Turn on the device and wait for 8 to 10 seconds, while the device will complete self inspection
and configuration. The top row of the LCD shows the name of the device. The local IP address
is displayed on the bottom row of the LCD.
Note:
the local IP address and unit name can be changed in the System Menu (refer to
section 7.4.1 and 7.4.3 System).
Use the
<ENTER>-key
to enter on the Main Menu. The < >-and< >-keys are used to choose
between the three main menus.
9
LAN
Rs232
Keyboard, Menu display and LAN control
TS/IP output port
(option)
TS/IP Input Port
(option)
A/V
Buffer
MPEG-2
Decoder
Tuner Input Port
ASI Input Port
AES/EBU (option)
ASI2/SDI output
port
ASI1 output port
TS
S
w
itc
h
Ma
tr
ix
