Author: RRi
Page - 14 -
Version 1.3
Date: 10-2019
BLANKOM-HDM-4230_User_Manual_ENv1.3.docx
MPEG2/4 HD-SDI to QAM and IP Encoder User Manual
Intelligent switches with Loop detection can also be used i.e. if you separate the Network ports by
VLAN's. You will find some more about streaming things at the end of this manual. Note: If you have set
more than 2 IP ranges in your PC and try to get the Streams by VLC: VLC is somehow stupid and do not
recognize via which Ethernet (RJ45 or WIFI) IP address –Source it can grab the Stream. The difference is
to manually set the METRIC values: The lower the Value the higher the priority for that interface IP
address.
3.2 General Setup
Status
After login into the encoder, you start with the status interface:
