- 14 -
All technical data are subject to change w/o further notice... © Irenis GmbH 06-2021...............
Network:
Here you can change the encoders IP-address and mode:
If you change it to DHCP – after a reboot it will catch it from your router. Disadvantage: You
need to check the encoder given IP Address by your router in its own menu or use an IP-
Scanner-tool.
We assume, that you are familiar with the basic settings of a network.
These are the basic ports for HTTP and RTSP-Streaming use. You can modify that but we
recommend to keep them as they are because RTSP – receivers might are fixed to that port
while HTTP isn’t. The bottom of the every of the menu-pages contain the ‘Set up’ buttons to
take and enable your changes.
The MAIN and SUB-Stream adjustments are nearly all similar:
