Bind Menu
Receivers are bound from the Bind menu. This is
also where the receiver protocol is specified,
along with the channels on which the LQ and
RSSI values will be emitted.
Note: ‘Old Prot’, and ‘Force Up’ are present to
support early beta testers, and will be removed in a
future firmware release.
Mode Menu
The RF mode, and transmitter protocol is
selected in this menu.
For the RF Mode, ‘Normal’ is a good
compromise between long range, and race.
‘Race’ is great for the race track with 160Hz
frame updates, and bidirectional link.
‘Pure Race’ is for the bonkers racer, who wants
to live on the edge, with 222.22Hz frame
updates.
In the vast majority of cases the Tx Mode
(Protocol) can be left in ‘Auto’ mode.
In fringe cases, the protocol can be forced by
selecting
Tx Mode
Manual, and manually
selecting the protocol.
for details on regional settings.
Spectrum Menu
The Spectrum Analyzer may be used to analyze
noise floor on the 2.4GHz band.
Set the start/stop frequencies, and press Start.
Note that the vertical scaling is -40dBm at the top
of the display, and -127dBm at the bottom. No
auto scaling.
ImmersionRC Limited, Kwai Chung, NT, Hong Kong, www.immersionrc.com
