surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED
will illuminate), Turn on the transmitter.
III. Receiver LED will change from rapid flashing to slow flashing and a few seconds
later when bind is accomplished the LED of receiver will illuminate solid. Failsafe should
be programmed correctly .
IV. Remove binding harness from the BIND channel. Restart the receiver by cycling it
power off and turn on and connect battery into BIND channel is recommended. All
channels should function properly now. You may test fail-safe by holding sticks in
corner, cycle transmitter on and off. Surfaces and throttle should return to your preset
fail-safe positions.
Notes:
1) This is not a Spektrum DSM2/X product, nor is it a copy of a Spektrum DSM2/X
product. The Spektrum and DSM2/X brand is a trademark of Horizon Hobbies USA.
2) This is not an underground black market fake Spektrum product.
3) Only one time bind procedure is required on a new receiver. Repetitive binding
provides no extra security. Always remember to remove the binding harness after
successful bind is completed.
Package including:
RM601 Receiver *1
Bind Harness*1
Содержание RM601
Страница 3: ......