6
4.10.
If the communication to the laser is successful, the application will start
filling in following information boxes by polling the laser:
•
Laser state.
•
Simmer duty
•
Pulse stretch
•
Temp
•
Interlock
•
Temp Warning
•
Laser fault
•
Laser VDC
•
Laser serial
•
Laser voltage Setting
•
Rated power
•
Measured power
•
Auto fan
•
Firmware version
•
Mod low ground
4.11.
If the communication failed, the application will display a failure status in
the status bar. The program will time out after 10 seconds and signal a
failure if the communication did not respond. A dialog box will be shown
to reset the serial port or to exit the application. (see figure 9)
