IR Robot Marubot Football League 4 Players, Инструкция по эксплуатации

Страница: 38 / 45

www.irrobot.com
37
8. Parts Replacement
8.1 Robot
8.1.1 Power Supplying Pins
The power supplying pins are key component to get the power from the power
supplying board and it is essential to check its state periodically.
If the tip of pin is worn out, it needs to change with new one
.(Every 500 plays)
There are 6 extra pins in the package for replacing.
(Normal Condition) (Need to replace)
Power Supplying
Pins condition
1) Separation of Power Supplying Pins : It is easy to take out the pin by pulling it out. If the pin doesn’t
pull out by hand, use a long-nose to take out . At this point, use cloth or tissue to cover the pin to protect,
then use a long-nose to pull out
2) Power Supplying Pins Set Up : P ushing in new pin with hand until it stops moving in. Make sure
that height of all 6 pins should be the same.
1. Before taking out the pin using
Long–nose, cover the pin by
cloth or tissue
2. Pull out the pin using Long–nose easily