IR Robot Marubot Football League 4 Players, Инструкция по эксплуатации

Страница: 18 / 45

www.irrobot.com
17
2.1 General Instructions
2. Installation Instructions
1) Consider to avoid the place such as humid, dusty or any possibility to damage the machine
during transportation or storing the machine, otherwise it can be major reason to damage the
machine.
2) Do not disassemble, repair, or remodeling the machine except authorized expert.
3) Avoid direct sunlight or placing the machine beside heating appliances.
4) Do not put wet hands or articles on the power supplying board during the power in “On”.
5) Before cleaning the machine, the power should be “Off”. Do not put the water or chemical
cleanser inside of the machine and just clean up with dried and soft cloth. Get rid of any wetness.
6) Make sure to remove any dust and materials especially metallic articles on the power supplying
board,
otherwise it is caused to short the power or create possible burning.
2.2 Installations
▪
Installation or dismantling should be made by authorized expert. Contact your local dealer if
you have any trouble on installation.
▪
Avoid any shock during transportation or installation.
▪
Keep the machine horizontally and hold it with stopper under the machine.
▪
The Z/B signal might be jammed up, if you install more than 2 machines
in the same area.(within20m)
1) Location
- Find stable and flat place and avoid wet place.
- Avoid direct sunlight, heat, and the place changes humidity and temperature dramatically.
2) Set up
- All machines must use proper power outlet.
- Please check total amperage when you use an extension line.
- Fix the machine with stoppers under the machine.