GW-WIFI-01
User_Guide_GW -WIFI-01_180511
Page 17
DDNS
DDNS service allows to get public address of network which the GW is assigned in. GW communicates with the DDNS server
in checking interval and transmits its current IP address.
For IQRF DNS:
The user or user application reads the IP address from the service provider server using the ID of the GW.
For other DDNS servers:
The user or user application accesses the GW using the
Host Name
. Refer to the website of given server.
DDNS
DDNS service activation
Service provider
List of supported DDNS servers
Host name
Name identification of GW within DDNS
User name
DDNS account username
Password
DDNS account password
Check Interval
Communication period between the GW and DDNS server
Operation Mode
The
Operation mode
tab provides the setting of the gateway.
Mode
Datalogger
The datalogger is active. Its content can be read using IQRF Cloud server (if enabled), or IQRF IDE
GW Tool.
Gateway
UDP channel is active. It is direct connection to the GW (without IQRF Cloud) using the application
protocol described in chapter
Application protocol
.
Communication ports can be selected in the
Gateway
field -
Port
and
Remote port
.
Logger
Packet Size The size dedicated for the data log in the gateway memory. By default, this value is set to 64 B, the same
as the maximum size of the IQRF packet. Shorter packets allow to store more data logs. Minimum packet
size is 1 B. When an IQRF packet oversizes the selected packet size, a part of user data is lost.
When the packet size is changed the content of internal memory is cleared.
