GW-USB-06
© 2016 MICRORISC s.r.o.
www.iqrf.org
User_Guide_GW-USB-06_160122
Page 11
Application
The functionality of TR transceiver inside the GW is fully user programmable. Factory default application is E03-TR (one of
basic IQRF examples).
Installing
See the
IQRF Quick Start guide
and IQRF IDE Help.
Operating system
See
IQRF OS User's guide
and
IQRF OS Reference guide
.
DPA framework and DCTR
See DPA Framework technical guide.
Programming
Programming the application is similar to the CK-USB-04A development kit usage. See the
IQRF Quick Start guide
,
CK-
USB-04A User's guide
and IQRF application examples included in IQRF Startup package (
www.iqrf.org/startup
).
Upload
GW-USB-06 enables to upload an application code into IQRF TR transceivers in following ways:
Wired upload using IQRF IDE running in the GW-USB-06 host.
Wireless upload (RFPGM
– RF Programming ™), e.g. when the GW is hosted on an equipment not supporting IQRF
IDE. Switching between RFPGM and operation modes must be solved in the application in this case. See
IQRF OS
User's guide
(Appendix RFPGM) and IQRF IDE (
Tools
→
CATS Service Tools
→
Control
menu,
Create CATS
button).
Debug
The application in internal TR transceiver can be debugged similarly as in discrete TR transceivers. See the
IQRF Quick
Start guide
, IQRF IDE Help and IQRF application example E06-RAM included in IQRF Startup package
(
www.iqrf.org/startup
).
Users have to ensure observing local provisions and restrictions relating to the use of short range devices by software, e.g.
the CEPT ERC/REC 70-03 Recommendation and subsequent amendments in EU.
