GW-ETH-02A
Using IQRF IDE
•
The IQRF IDE
GW Tool
is intended for GW configuration, checking of operational and error states and for access to the
datalogger. When using the GW Tool, the communication via Ethernet is enabled.
•
Additionally, IQRF IDE can be used similarly as for the CK-USB-04(A): uploading the code into TR transceiver,
configuration of TR module inside the GW, debugging of the application, using the IQMESH Network manager etc.
In this mode the communication via Ethernet is disabled.
Internal web server
To get connected to the internal web server it is necessary to know IP address of the GW or the GW host name (if
the network supports the NBNS, i.e. within the LAN only). Internal web server is used for GW configuration (manually
in graphic environment or by loading a binary file
*.gwcnfg
), datalogger reading (TX, RX, System log), TR module
programming (
*.hex
,
*.iqrf
,
*.trcnfg
) and FW upgrading (
gweth.hex
). When uploading any of these files, it is
necessary to have SD card plugged in the GW card slot, otherwise the operation can not be completed.
GW configuration
GW configuration is possible via internal www server, IQRF IDE or (especially for troubleshooting) via SD card.
© 2016 MICRORISC s.r.o.
www.iqrf.org
User_Guide_GW-ETH-02A_ 160208
Page 7
