GW-ETH-02A
Web server
The web server inside the GW is primarily intended for GW
configuration and for local reading out from the datalogger. To access
the web server, the IP address of given GW must be known. When
accessing from a local network, the domain name '
iqrf_xxxx
'
(where
xxxx
are last 4 digits of the MAC address) can be used
instead of the IP address. Both GW user name and the GW password
are preset to '
iqrf
' from the factory. Every page of the web server
has a help.
It is recommended to change the user name and it is required to
change the GW password as soon as possible, just after the first login
to the web server.
Web server can be enabled/disabled in IQRF IDE
GW
Tool/Administration
.
The web server implemented inside the GW-ETH-02A should be accessed by any common up-to-date web browser
except of Internet Explorer by Microsoft.
Menu
The main menu provides an access to the configuration pages of GW.
•
Status
page shows information about the device, current network
connection and the GW status.
•
LAN Setup
page allows to select the network connection parameters.
•
Operation Mode
page allows to select GW mode which GW works in.
•
Dynamic DNS
page allows to configure Dynamic DDNS service used to
find the public IP address of the GW.
•
Password
page allows to change the access parameters for the Web
server, Cloud server and IQRF IDE.
•
Time
page allows to set the time and date manually or to activate
automatic time synchronization with the selected time server.
•
Maintenance
is intended for fundamental changes in GW and internal TR
functionality.
© 2016 MICRORISC s.r.o.
www.iqrf.org
User_Guide_GW-ETH-02A_ 160208
Page 19
