IQEYE TECHNICAL TRAINING
Settings Page - IQrecorder Tab
Examples
1.0 = record every second
10.0 = record every 10 seconds
0.5 = record twice a second
Use 'max' for the maximum rate at which the camera can record images on the FTP
server. Use '0' to turn off normal (also called periodic or time lapse) images.
This sets the same parameters as the interval settings on the Trigger Settings Page
Record resolution
Choose the size/resolution (width by height) in pixels of the
recorded normal images. The maximum size given in this setting may be affected
by the crop window setting on the Window Settings Page .
Record rate
Specify the number of
seconds between recorded images.
Record to
Specify if you wish to record to your camera's internal hard drive or
removable pc-card storage (if attached) or to an external FTP server.
Recorder IP
Specify the IP address (like 128.73.220.67) of the remote FTP server to
which your camera will transfer the recorded images. You may use a DNS name (like
ftp.mycompany.com) if you have configured a nameserver (see the Network Settings
Page ).
Username
Define the username that the camera will use when logging into the FTP
server. You may enter "anonymous" if your FTP server will allow anonymous write-
access. The username can be obtained from the person responsible for managing
the FTP server.
Password
Specify the password that the camera will use when logging into the FTP
server. Valid password characters are the alphanumeric characters (a-z, A-Z, 0-9).
The password
can be obtained from the person responsible for managing the FTP server.
This sets the same parameter on the Trigger Settings Page .
