11
c. Adjust the tilt of the camera by loosening the tilt angle lock screw as shown
in Figure 10.1 and position the lens to the desired position. When finished,
lock down the camera tilt angle by tightening the tilt lock screw.
d. Adjust the field-of-view and focus rings to focus the lens. Be sure to lock the
lens ring thumbscrews when desired focus is achieved.
e. The Alliance-pro is equipped with an analog video port, RCA type, which
can be found next to the reset / reboot buttons. This analog port utilizes
IQinVision’s exclusive IQfocus utility which allows precise focusing of the
camera. Note that IQfocus shuts off 30 minutes after the Alliance-pro is
powered up or immediately after sending a digital stream.
NOTE: The lens on the Alliance-pro cameras are fixed iris and therefore no iris adjustment is required.
11 Reboot and Factory Restore
a. Rebooting - Depress the reboot key for 2-3 seconds then release.
b. Restoring to Factory Default - Press the “Factory” button for 2-3 seconds then
release.
Tilt Lock Mechanism
Reboot
Factory
Figure 10.1
Figure 11.1
