IQ Power Tools iQ360XT, Руководство оператора

Страница: 8 / 20

iQ360XT
Operator’s Manual
888-274-7744
www.iqpowertools.com
SYMBOLS & SAFETY MESSAGES
Symbols on the machine
WARNING! The machine can be a dangerous
tool if used incorrectly or carelessly, which
can cause serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you understand
the instructions before using the machine
or performing any maintenance.
Always wear:
• Breathing mask
• Hearing protection
& protective goggles or a visor
Warning! High voltage. Risk of an electric
shock. Do not expose to rain or water.
Explanation of Warning Levels
Read and follow ALL safety, operating and maintenance
instructions. Failure to read and follow these
instructions could result in damage and/or reduced
equipment life. The messages below are to inform
the user about potential hazards that could lead to
injury, death and/or equipment damage. Each safety
messages will be proceeded by one of the following (3)
three words that identify the severity of the message.
Not following instructions
WILL lead to DEATH or
SERIOUS INJURY.
Not following instructions
COULD lead to DEATH or
SERIOUS INJURY.
Not following instructions
CAN lead to injury.
DANGER
3.1
DAMAGE PREVENTION AND INFORMATION:
A Damage Prevention Message is to inform the user of
important information and/or instructions that could
lead to equipment or other property damage if not
followed. Information Messages convey information
that pertains to the equipment being used. Each
message will be preceded by the work NOTE, as in the
example below.
NOTE: Equipment and/or property damage may result
if these instructions are not followed.
GENERAL SAFETY PRECAUTIONS & HAZARD SYMBOLS:
In order to prevent injury, the following safety
precautions and symbols should be followed at all times!
TURN OFF POWER SWITCH
Before plugging into power source.
UNPLUG FROM POWER SOURCE
Before changing blades or doing any maintenance or
adjustment to power tool.
KEEP GUARDS IN PLACE
In order to prevent injury, keep guards in place and in
working order at all times.
REMOVE ADJUSTING KEYS AND WRENCHES
Form a habit of checking to see that keys and adjusting
wrenches are removed from the power tool before it is
turned on.
KEEP WORK AREA CLEAN
Cluttered work areas and benches invite accidents.
DO NOT USE IN DANGEROUS ENVIRONMENTS
Do not use power tools in damp or wet locations nor expose
them to rain. Always keep the work area well lighted.
DO NOT FORCE THE TOOL
A power tool will do a job better and safer operating at
the rate for which it was designe.
USE THE RIGHT TOOL
Do not force a tool or an attachment, to do a job that it
was not designed to do.
NEVER CUT MAGNESIUM WITH THIS TOOL