background image

iQ228CYCLONE

Operator’s Manual

888-274-7744

www.iqpowertools.com

En

gli

sh

KEY SYMBOLS & SAFETY RULES

Symbols on the machine

WARNING! The machine can be a 

dangerous tool if used incorrectly or 

carelessly, which can cause serious or 

fatal injury to the operator or others.

Explanation of Warning Levels

The warnings are graded in three levels.

Used if there is a risk of serious injury or death for 

the operator or damage to the surroundings if the 

instructions in the manual are not followed.

Used if there is a risk of injury to the operator or 

damage to the surroundings if the instructions in 

the manual are not followed.

Used if there is a risk of damage to materials or the 

machine if the instructions in the manual are not followed.

NOTICE

1.1

Do not expose to rain.

Never cut without using the blade guard.

Risk of injury due to accidental starting. Do not 

use in an area where children may be present.

Unused tile saw may cause personal injury 

 

- Remove this tile saw blade when using  

 

   other accessories.

Always use manufacturer’s approved 

cutting wheels. Replace damaged cutting 

wheel before operating.

Use tool only with smooth edge cutting wheels 

free of openings and grooves.

Please read the operator’s 

manual carefully and make sure 

you understand the instructions 

before using the machine or 

performing any maintenance.

Always wear hearing protection

Always wear protective goggles 

or a visor.

High voltage. Risk of an electric shock. 

Turn off machine and unplug before 

transportation.  

Should not be disposed of with general 

household waste, but collected 

separately for reuse or recycling.

Additional Safety Warnings

Keep your hands and feet away from the 

cutting wheel.

CSA approved.

This product can expose you to chemicals, including Cobalt, Lead and Silica Dust 

which are known to the State of California to cause cancer or birth defects or 

otherreproductive harm. For more information, go to www. p65Warnings.ca.gov.

WARNING : P ROP 6 5

Este producto puede exponerlo a productos químicos, incluidos cobalto, plomo 

y polvo de sílice, que el estado de California sabe que causan cáncer, defectos de 

nacimiento u otros daños irrecuperables. Para obtener más información, vaya a 

www. p65Warnings.ca.gov.

Содержание iQ228CYCLONE

























Отзывы: