IQ Power Tools iQ1014S, Руководство оператора

Страница: 11 / 19

iQ1014S
Operator’s Manual
888-274-7744
www.iqpowertools.com
Machine Power
STARTING MACHINE
The ON/OFF switch is located on the front panel of the
machine. To start the saw motor, engage the
POWER
switch - or on symbol.
Defective switches should be replaced by an
authorized service workshop.
STOPPING MACHINE
To stop the saw motor, engage the POWER switch O
or off symbol.
MAINTENANCE
5.1
Cleaning the Filters
SHAKING OPERATION
This unit is equipped with a shaking mechanism to clear
the filter elements of dust for optimum suction. At the
beginning of each shift and approximately every 30-60
minuets or as needed, power off the unit, clean the filter
by stepping on the pedal ten (10) times.
You may then power the unit on and resume cutting.
EMPTYING THE DUST TRAY
To empty the dust tray open access door on the front of
unit remove tray and dispose of debris. Dust tray should
be checked periodically and debris removed regularly.
Always wear personal protective equipment when
servicing unit.